Freelap Stopwatch - Page 7

• 
-SAFETIME
This is the minimum possible time between 2 transmitters. If this time is
shorter, a Lap will not be recorded.
Recommended values for each sport:
SPORT STOPTIME(seconds) SAFE TIME (seconds)
MTB 5 1
BMX 5 1
ATHLETICS 5 1
SWIMMING 10 10
It is also possible to use the stopwatch without transmitters, as a simple
stopwatch. For this, we have to change the SAFE TIME value by choosing
’’no’’(see training section).
Forsportswherethespeedisslower(e.g.swimming),theSTOPTIME
and SAFE TIME value has to be 10 seconds.
-HOLDTIME
When passing a Freelap transmitter the stopwatch will show a LAP TIME.
TheHOLDTIMEistheperiodwhichtheLAPTIMEstaysdisplayedon
the stopwatch screen e.g. 10, 20 seconds or until the next LAP.
Ifyoudon’twanttochangeallthesettings,presstheMODEbuttonto
conrmandreturntoTIMEmode.
EN 5