Freelap Stopwatch - Settings; Time, Date, Alarm and Backlight; Stopwatch

• • 
• Time,Date,AlarmandBacklight
To change the time, date and alarm, press the SELECT button for 1
second (SEL/LIGHT).
Tochangetheashingvalue,usetheUPorDOWNarrowbuttons(right
buttons). Press the SELECT button to conrm and move to the next
value.
Ifyoudon’twanttochangeallthesettings,presstheMODEbuttonto
conrmandreturntoTIMEmode.
-Enable/Disablethealarm
To display the alarm, press the UP arrow button. To enable / disable,
presstheDOWNarrowbouton.
-DisplayDate
ThisappearsonlybypressingtheDOWNarrowbutton.
-Backlight
The stopwatch can be used at night, just press the SEL/LIGHT button
(except in timing mode (CHR))
• Stopwatch
The stopwatch settings have to change dependant on the sport it is being
used for.
There are 3 modes:
-STOPTIME
Thisistheminimumdurationrequiredinthetransmittereldtocreatea
subtotal (intermediate stop).
The choice of duration (5 or 10 seconds) is based on the activity (see
table below).
2 SETTINGS
EN 4