MODEL: PFL618BR
03
MODEL: PFL618BR
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
WARNING:
GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLESHOOTING
WEARING PARTS
WARRANTIES
LOADING CLEAT NAILS
LOADING STAPLES
CHANGE THE FOOT PLATE
SETTING THE AIR PRESSURE
OPERATING THE TOOL
CLEARING JAMS
P3
P5
P5
P6
P6
P6
P7
P7
P7
P8
P9
P9
P9
P10
SAVE THIS MANUAL
Keep this manual for the safety warnings,
precautions, operations, inspections and
maintenance. Keep this manual and the
receipt in a safe and dry place for future
reference.
SYMBOLS
In this manual, on the labels, packages and all other information provided with this tool. The
following signal words and meanings are intended to explain the levels of risk associated with
this tool.
To avoid serious personal injury, do not
attempt to use this product until you
read thoroughly and
understand it completely. Save this
manual and review frequently for
continuing safe operation and instructing
others who may use this tool.
the manual
WARNING:
!
SYMBOLS SIGNAL MEANING
!
!
WARNING:
CAUTION:
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
property damage.
●
●
GENERAL SAFETY RULES
WORK AREA
Keep the work area clean and well lighted.
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Keep bystanders, children, and others away
while operating the tool.
Cluttered benches and dark areas increase the
risks of accidents.
The tool
creates a spark which may ignite flammable
liquids, gases or dust.
Distractions could
result in improper use and cause injury.
Avoid unintentional misfires. Always use
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
●
●
●
●
●
●
●
●
●
●
●
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS.
CALIFORNIA PROPOSITION 65
WARNING:
!
When using tools, basic precautions
should always be followed, including the
following:
WARNING:
!
This product or its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
PERSONAL SAFETY
Always wear eye protection.
Always wear hearing protection when
using the tool.
Operator and
others in the work area should always wear
ANSI-approved safety goggles with side
shields. Eye protection is used to guard against
flying fasteners and debris, which may cause
severe eye injury. You can use the goggles
packed with the tool.
Prolonged exposure to high
intensity noise may cause hearing loss.
Use safety equipment. A dust mask, non-
skid safety shoes and a hard hat must be used
for the applicable conditions. Wear a full face
shield if you are producing metal filings or wood
chips.
Dress properly.
Stay alert, watch what you are doing and
use common sense when operating a
power tool.
Avoid unintentional firing.
Keep proper footing and balance at all times.
Do not use on a ladder or unstable supports.
Make sure the hose is free of obstructions
or snags.
Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
Do not use tool while tired or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
Keep fingers away
from trigger when not driving fasteners,
especially when connecting the tool to the air
supply.
Proper footing and balance enables better
control of the tool in unexpected situations.
Stable footing on a solid surface enables better
control of the tool in unexpected situations.
Entangled or snarled hoses can
cause loss of balance or footing and may
become damaged, resulting in possible injury.
●
●
HTTP://WWW FREEMANTOOLS COM 1-888-669-5672.. HTTP://WWW FREEMANTOOLS COM 1-888-669-5672..
02
To Next Page
Loading...
