UNPACKING YOUR ICE MAKER
www.freezimer.com
water, remove the odor, to provide clean and healthy drinking water.
Open the package, take out the filter, and rinse it clean. Put the filter into
the pitcher and press it firmly.
As the first 3 cans of filtered water may contain black granular toner,
please use it for watering plants or just discard it.
5. Transparent Window: Allows you to check how much ice has been
produced without having to open the top and letting warm air in.
6. Indicator Lights: ON/OFF, TAKE ICE, ADD WATRER, ICE FULL.
7. Air Vents : Located on the back and sides of the unit, these vents help
prevent the unit from overhearing. Please leave at least six inches of
space all around the unit for proper ventilation.
8. Water Drain: Allow you to empty the water from the tank easily.
1. Remove the exterior and interior packaging. Check if the ice bin and water filter are
inside. If any part or accessory is missing, please contact our customer service.
2. Keep the machine upright for 24 hours before the first use.
3. Find a location for your ice maker that is protected from direct sunlight and other
sources of heat (i.e.:stove,furnace,radiator). Place the ice maker on a level surface.
Maker sure that there is at least 5 inches of space between the back and sides of
your ice maker and the wall.
4. The appliance must be positioned so that the plug is accessible.
7
PROP. 65 WARNING FOR CALIFORNIA RESIDENTS
This symbol indicates the refrigerant R600a and the
non-metal-lic materials of the appliance are flammable. It’s
a warning symbol. Warning: Risk of fire / flammable materials.
WARNING:
Cancer And Reproductive Harm
www.p65warning.ca.gov
To Next Page
Loading...
