CARE AND MAINTENANCE
www.freezimer.com
1. Before commencing any cleaning, unplug the unit and remove any ice
cubes. Use a diluted solution of water and vinegar to clean the inside
and the outside surface of the Ice Maker. Do not spray Ice Maker with
chemicals or diluted agents such as acids, gasoline or oil. Rinse
thoroughly before starting.
2. Keep any ventilation openings of the appliance enclosure, or in the
built-in structure, clear of obstruction. Do not use mechanical devices
or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
3. Open the drain cap on the back of the machine to drain the water.
4. Clean the inside with diluted detergent, warm water and a soft cloth.
5. The exterior of the ice maker should be cleaned regularly with diluted
detergent and warm water.
6. Dry the inside and outside with a soft cloth.
7. After cleaning, plug the drain pipe on the back of the machine into the
cover.
Tip: When the machine is not in use, open the drain to allow the water to
drain completely from the tank.
Always use fresh water before starting any ice production, either at
initial installation or after a long shut-off period.
11
To Next Page
Loading...
