freightliner EconicSD - Page 81

X
To select the drivinglevel: usethe u
or t button to select preselection driving
level =.
X
Briefly press the r or s button.
The chassisisraised or lowered automati-
cally to the driving level.
Whenthe chassisisatdriving level,the
¸ indicator lamp in the instrument clus-
ter goesout.
X
To store the chassisheight: raise or lower
the chassistothe desired height.
X
Using the u or t button, select mem-
ory positionM1orM2for chassisheight A.
X
Press the r button for approximately
two seconds.
The current height of the chassisframe is
stored under the corresponding memory
positionM1orM2.
X
To callupthe chassisheight: using the
u or t button, select memory posi-
tionM1orM2for chassisheight A.
X
Call up the selectedmemory positionby
pressing s.
The chassiswillberaised/lowered automat-
icallytothe stored height.
Youcan find more informationabout level con-
trol in the "Driving mode" section
(Y page 140).
Maintenance menuwindow
!
Confirming maintenance work thathas not
been performed on time can lead to damage
to the vehicleorits assemblies. It could also
resultinincreased wear.
If youconfirm maintenance work acciden-
tally or before it hasbeenperformed,the
maintenance system will calculate anew
maintenance duedate. To prevent damage
to the vehicleand its assemblies, have the
corresponding maintenance work carried
outimmediately.
Onlyconfirm maintenance work if the main-
tenance work hasactually been completed.
The maintenance system calculatesmainte-
nance duedates for the vehicleand its assem-
bliesbased on the vehicle's operating condi-
tions. The event windowautomaticallydisplays
maintenance duedates 14 days in advance.
Whenthe maintenance duedatehas been
reachedorexceeded,the on-board computer
shows additional event windows
(Y page 89).
If the maintenance work is carriedout at a
FreightlinerService Center, the factthatthe
work hasbeencarriedout professionallywill
be confirmedinthe on-board computerand
the service report.
X
Using the u or t button, scroll to â
operationand maintenance.
X
Using the r or s button, scroll to the
MaintenanceMaintenance menu window.
X
To display the maintenancepoint and
due date: press the 9 button.
The input windowshows:
R
the maintenance point, e.g. EngineEngine
R
the maintenance duedate, e.g.
23.09.201823.09.2018
R
the remaining distance, e.g. 1250miles1250miles
If no predictionfor the maintenance due
date is possible, the input windowshows:
R
the maintenance point, e.g. EngineEngine
R
the maintenance duedate, e.g.
--.--.------.--.----
R
the remaining distance, e.g. ----miles----miles
X
To display the next maintenancepoint
and due date: usethe r or s button
to display the next maintenance point.
Depending on the vehicle's equipment, you
can callupthe following maintenance
points:
R
Time-basedmaint.Time-basedmaint.
R
Brakes,axle1/2/3Brakes,axle1/2/3
R
Air filterAir filter
R
Diesel particle filterDiesel particle filter
R
EngineEngine
R
RearaxleRearaxle
R
TransmissionTransmission
X
To reset the maintenancedue date: press
the r or s button to display the
desired maintenance point.
X
Press the u button.
If areset is possible, the input window
shows,for example, Reset?Reset? NoNo/YesYes.
X
Use the r button to select the YesYes menu
barand press the u or 9 button to con-
firm.
On-board computer
79
On-board computer and displays
Z