freightliner EconicSD - Page 83

X
Select the desiredcontrol unitusing the
r or s button.
X
Displayfurther detailsonthe control unitby
pressing the u button.
Settingsmenu
Menuwindowmenu
If youchange the settings in the MenuMenu menu
window,the changes affect the display of the
menu window.
X
Use the u or t button to scrolltoä
settings.
X
To setthe units of measurement: press
the 9 button.
The input window displaysalistofpossible
settings:
R
clock modein24h24h or 12h12h
R
speed in km/hkm/h or miles/hmiles/h
R
distance in kmkm or mimi
R
liquid units in literliter, UK galUK gal or US galUS gal
R
temperature units in °C°C or °F°F
R
averagefuelconsumption in l/100kml/100km,
km/lkm/l or mpgmpg
R
pressure units in bar/kpabar/kpa or psipsi
R
weight units in tt, tntn or l.tnl.tn
X
Select the desiredmenu barwiththe r
or s button.
X
Changethe setting with the u or t
button.
Lighting menuwindow
You can set the brightness of the instrument
cluster, the switch and the audiodisplay as
well as the delayed switch-off of the surround
lighting in the lighting menu window.
You can only adjust the brightness of the
instrument cluster and the switches if night
modehas beendetected and the lighting is
switched on. If the setting cannotbechanged,
the input window displays Day modeDay mode.
Surround lighting is switched on for the dura-
tion of the delayed switch-off time set if you:
R
openadoorinpoorlight conditions (vehi-
cleswithrain/light sensor)
R
switch off the low-beamheadlampsand the
ignition and openadoorwithin approx-
imately fourminutes (vehicles withoutrain/
light sensor)
X
Use the u or t button to scrolltoä
settings.
X
Use the r or s button to scrolltothe
LightingLighting menu window.
X
To adjust the instrument lighting/
delayedswitch-off: press the 9 button.
The input window shows the instrument
lighting as abar display and the exterior
lighting delayed switch-off time that has
beenset.
X
Use the r or s button to select
Instrument panelInstrument panel or Delayswitch-Delayswitch-
off, ext. lightingoff, ext. lighting.
X
Changethe setting with the u or t
button.
If youset the delayed switch-off to 0s0s,the
surround lighting is switched off.
Languagemenuwindow
The languages available depend on the country
in which the vehicleissold. All text displays
are shown in the set language. You can install
more languages. Information on installing
more languages can be obtainedfrom any
FreightlinerService Center.
X
Use the u or t button to scrolltoä
settings.
X
Use the r or s button to scrolltothe
LanguageLanguage menu window.
X
To setthe language: press the 9 button.
The input window displaysaselectionoflan-
guages.
X
Select the desiredlanguagewiththe r
or s button.
X
Changethe setting with the u button.
Serviceproducts menuwindow
General notes
!
Whenyou change the service product data
via the on-board computer, the maintenance
system adjusts the maintenance duedates
accordingly.
Set the data for the service products added.
Otherwise, the assembliescould be dam-
aged.
Observe the information under "Serviceprod-
ucts" (Y page 198).
On-board computer
81
On-board computer and displays
Z