Maintenance Operation 00–15 (Table 14), summa-
rizes all Lubrication and Fluid Level Check opera-
tions that must be performed at the M1 Maintenance
Interval for Schedules I, II, and III for all models but
FL112.
Maintenance operation numbers given in the table
are reference numbers used to help you find detailed
instructions in the manual on the lubrication or fluid
check. Maintenance Operation 00–18 can be used
as a guide by those who do not need to consult the
detailed lubrication and fluid check instructions given
elsewhere in the manual.
Maintenance Operation 00–15
M1 Lubrication and Fluid Level Check for All Models but FL112
Maint. Oper.
No.
Operation Description
25–01 Clutch Release Bearing and Cross-Shaft Lubricating
25–03 Hydraulic Fluid Level Checking
26–01 Manual Transmission Oil Level Checking
31–03 Fifth Wheel Lubricating
32–02 Suspension Lubricating
33–01 Knuckle Pin Lubricating
33–03 Tie-Rod End Lubricating
33–05 All-Wheel-Drive Front Axle Oil Level Checking
35–01 Axle Lubricant Level Checking
41–02 Driveline Lubricating
42–03 Foot Brake Valve Actuator Lubricating, Bendix E–12
42–11 Manual Slack Adjuster Lubricating
42–13 Automatic Slack Adjuster Lubricating, Meritor
42–24 Automatic Slack Adjuster Lubricating, Gunite
42–26 Automatic Slack Adjuster Lubricating, Haldex
46–02 Drag Link Lubricating
46–03 Power Steering Reservoir Fluid Level Checking
46–05 Steering Gear Lubricating (Ross TAS Series)
72–01 Weatherstrip, Door Hinge, and Door Latch Lubricating
Table 14, Maintenance Operation 00-15, M1 Lubrication and Fluid Level Check for
All Models but FL112
General Information00
Lubrication and Fluid Level Check (M1, all models
but FL112): 00–15
Business Class Trucks Maintenance Manual, February 200400/24
To Next Page
Loading...
