Maint.
Oper. No.
M1 Maintenance Interval Operations
00–17 Lubrication and Fluid Level Check (FL112 only, includes the following):
• Clutch Release Bearing and Cross-Shaft Lubricating
• Manual Transmission Oil Level Checking
• Fifth Wheel Lubricating
• Suspension Lubricating
• Knuckle Pin Lubricating
• Tie-Rod End Lubricating
• All-Wheel-Drive Front Axle Oil Level Checking
• Axle Lubricant Level Checking
• Two-Speed-Axle Shift Unit Oil Level Checking
• Driveline Lubricating
• Foot Brake Valve Actuator Lubricating, Bendix E-12
• Camshaft Bracket Bushing Lubricating
• Manual Slack Adjuster Lubricating
• Automatic Slack Adjuster Lubricating, Meritor
• Air Reservoir Automatic Drain Valve Disassembly, Cleaning, Inspect-
ing, and Lubricating, Bendix DV-2
• Automatic Slack Adjuster Lubricating, Gunite
• Automatic Slack Adjuster Lubricating, Haldex
• Steering Driveline Lubricating
• Drag Link Lubricating
• Power Steering Reservoir Fluid Level Checking
• Steering Gear Lubricating (Ross TAS Series)
• Weatherstrip, Door Hinge, and Door Latch Lubricating
26–06 Chrysler Transmission Fluid and Filter Changing
26–07 Chrysler Transmission Band Adjusting
31–02 Fifth Wheel Inspecting
32–01 Suspension Inspecting
33–02 Tie-Rod End Inspecting
35–02 Axle Breather Checking
41–01 Driveline Inspecting
42–01 Air Dryer Inspecting, Bendix AD–9
42–02 Air Brake Valve Inspecting and Leak Checking, Bendix BP–R1
42–04 Air Brake Valve Operation Checking, Bendix BP–R1 and E–12
42–05 Relay Valve Checking, Midland
42–06 Quick Release and Flipper Valves Checking, Midland
42–07 Brake Chamber Inspecting (All Models)
General Information00
M1 Maintenance Interval Operations Table: 00–10
Business Class Trucks Maintenance Manual, February 200400/18
To Next Page
Loading...
