EasyManua.ls Logo

Fremco NanoFlow MAX - User Manual

Fremco NanoFlow MAX
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Valid from 01.07.2021 | Rev. 1.0
From Serial No. 9328.3023
FREMCO A/S
ELLEHAMMERVEJ 14 | DK9900 FREDERIKSHAVN, DENMARK | VAT NO.: DK30815416
TELEPHONE +45 7230 1213 | SALES@FREMCO.DK | WWW.FREMCO.DK
THIS MATERIAL IS COPYRIGHT PROTECTED
NanoFlow MAX
For fiber dimension 0.8-4.5 mm
Operating manual
Responsible manufacturer: Fremco A/S
Machine: NanoFlow MAX
This is the original operating manual for NanoFlow MAX from Fremco.
Question and Answer IconNeed help?

Do you have a question about the Fremco NanoFlow MAX and is the answer not in the manual?

Summary

1. Introduction

Original Instructions

States these are the original instructions for the NanoFlow MAX machine.

Purpose of Instructions

Explains the goal of ensuring correct installation, use, handling, and maintenance.

Accessibility of Instructions

Mandates instructions be kept accessible to staff and maintenance personnel.

Required Knowledge

Emphasizes employer's duty to ensure staff understand instructions.

2. General Machine Information

Manufacturer Details

Details the company and address of the machine's manufacturer.

Machine Designation

States the complete designation of the machine.

Machine Plate Information

Describes the location and content of the machine's identification plate.

3. Technical Specifications

4. Safety Instructions

5. Maintenance Guidelines

6. Identification

7. Application of NanoFlow MAX

8. Mounting Procedures

9. Supply of Compressed Air

10. Fiber Protection System

Torque Limitation

Controls pushing force to protect fiber during blowing.

Wheel Spin Supervision

Monitors wheel speed to prevent fiber damage from slippage.

Automatic Stop Function

Enables automatic machine stop upon reaching a goal.

11. Machine Overview

12. Running the Fiber Blowing Machine

13. Accessories for NanoFlow MAX

Aluminium Tripod with Quick Connector

Provides stable mounting and easy portability for the machine.

Reel Holder Arm

Facilitates installation of preconnected fiber on the machine.

Fiber Stop End Kit

Activates fiber safety by stopping fiber at the duct end.

Valve for Reverse Airflow

Used for removing fiber from a duct using compressed air.

Shoulder Strap

Allows mobile operation of the machine without a table or tripod.

14. Adaptor Plates and Duct Adaptors

14.1. Choosing the Correct Adaptor Plates

Guidelines for selecting appropriate adaptor plates based on fiber size.

14.2. Photo Guide: Changing Adaptor Plates

Step-by-step visual guide for mounting adaptor plates and duct adaptors.

Mounting Adaptor Plates

Detailed instructions for correctly installing adaptor plates onto the machine.

15. 3-Step Installation Guide of Filer and Water Separator

16. EC Declaration of Conformity

EC Directives

Lists relevant European directives for machinery compliance.

International Standards

References international standards applied for machinery safety.

European Standards

Cites European standards related to pneumatic fluid power systems.

Technical File Responsible

Identifies the person responsible for the technical documentation.

Attested By

Shows signatures and dates of attestation by company representatives.

17. UKCA Declaration of Conformity

UK Directives

Lists relevant UK regulations for machinery compliance.

International Standards

References international standards applied for machinery safety.

European Standards

Cites European standards related to pneumatic fluid power systems.

Technical File Responsible

Identifies the person responsible for the technical documentation.

Attested By

Shows signatures and dates of attestation by company representatives.

Fremco NanoFlow MAX Specifications

General IconGeneral
BrandFremco
ModelNanoFlow MAX
CategoryIndustrial Equipment
LanguageEnglish