Fremco NanoFlow MAX - 15. 3-Step Installation Guide of Filer and Water Separator

P a g e | 18 of 20
FREMCO A/S
ELLEHAMMERVEJ 14 | DK9900 FREDERIKSHAVN, DENMARK | VAT NO.: DK30815416
TELEPHONE +45 7230 1213 | SALES@FREMCO.DK | WWW.FREMCO.DK
15. 3-STEP INSTALLATION GUIDE OF FILER AND
WATER SEPARATOR
3-step installation guide
of the filter and water separator on compressor
Item No.: 103-160601064
1.
Attach the water separator on the
compressor’s discharge nozzle.
2.
Attach air hose on the separator’s
discharge nozzle.
3.
Attach the opposite end of the air hose on
the machine.
NB: Installation of the filter and water separator decreases moisture condensation generated from the airflow of the
compressor. To obtain greater fiber blowing performance and equipment durability, we also recommend the use of a
dryer/cooler during fiber blowing deployment jobs.