Do you have a question about the Fresenius Medical Care 4008 HDF and is the answer not in the manual?
Type | Hemodialysis machine |
---|---|
Manufacturer | Fresenius Medical Care |
Model | 4008 HDF |
Dialysate Flow Rate | 300 - 800 ml/min |
Single Needle | Yes |
Blood Leak Detector | Yes |
Air Detector | Yes |
Display | Touchscreen |
Treatment Modes | HD, HDF |
Ultrafiltration Rate | 0.0 - 4.0 l/h |
Power Supply | 230 V, 50/60 Hz |
Safety Standards | IEC 60601-1 |
Guide on locating information within the manual using tables and contents.
Explains the intended audience and use of the manual for studies and reference.
Overview of the manual's chapter structure and content.
Specifies the required qualifications for using the manual effectively.
Details the components that comprise the 4008 HDF option.
Explains T1 test procedures and associated error messages.
Lists and explains error codes occurring during operation and HDF test.
Specific error messages related to the substituate pump.
Provides general information and requirements for technical safety checks.
Overview of calibration procedures and required measuring instruments.
Step-by-step guide for calibrating the UF2 pump.
Details electrical safety inspections according to VDE standards.
Instructions for calibrating the machine's scales.
Procedure for calibrating the substituate sensor.
Steps to calibrate the HDF blood pump and its components.
General guidance for performing repairs on the machine.
Description and layout of the LP 625 display board.
Description and layout of the LP 754 control board.
Description and layout of the LP 760 motor control.
Description and layout of the LP 761 keyboard.
Description of the LP 762 scales communication interface.
Description of the LP 763 serial interface extender.
Guide on how to find and order spare parts.
Lists Printed Circuit Boards available as spare parts.
Details spare parts for the machine's scales.
Lists spare parts for the substituate lift mechanism.
Spare parts for specific pumps and valves.