Friax RSF2 - Alarms

15
12:00
-
1
er
2
e
3
e
4
e
5
e
6
e
7
e
8
e
9
e
10
e
1
1
1
1
1
1
2
2
2
2
2
2
AS2C
AS1C
ASO
AS3O
AVEc
AVCc
A SL
A SH
AhRh
AS3c
AS3h
ArF
11
e
12
e
Alarms
Description and display of errors
Errors are displayed by text replacing the clock indication in ON modes
and STANDBY with the following possible texts:
For AS1C probe errors and
AS2C, the flashing ‘ERR’ text replaces
the temperature value.
Example 2:
When an error is present, the corresponding error text is displayed instead of the indication
of the time and the remote control backlight flashes 2 times 0.5s every minute.
Precision, this management of the backlight in the event of an error will not be done in OFF mode.
Only one alarm is displayed at a time in order of highest priority, example:
If 2 errors are present, AS3O and AS3H, only AS3O will be displayed because it has a higher priority
important, given that this alarm is type 2 and the other is type 1.
For troubleshooting, you must first resolve the visible error before seeing the following alarms if
multiple alarms.
ŝƐƉůĂLJŽƌĚĞƌ
;ƉƌŝŽƌŝƟnjĂƟŽŶͿ ƌƌŽƌŶĂŵŝŶŐ
dŝŵĞĚŝƐƉůĂLJĞĚсŶŽĞƌƌŽƌ
ĞůůĂƌƚĞŵƉĞƌĂƚƵƌĞƐĞŶƐŽƌĐƵƚͲŽī;ŶƚĐϭϬŬͿ
ĐĞůůĂƌƚĞŵƉĞƌĂƚƵƌĞƉƌŽďĞ;ƐŚƚͿƵƫŶŐ
ĞůůĂƌƚĞŵƉĞƌĂƚƵƌĞŽǀĞƌŚĞĂƟŶŐ
ŽŶĚĞŶƐĞƌƚĞŵƉĞƌĂƚƵƌĞŽǀĞƌŚĞĂƟŶŐ
ǀĂƉŽƌĂƚŽƌĨĂŶĨĂƵůƚ
Condenser fan fault
>ŽǁƚŚƌĞƐŚŽůĚĐĞůůĂƌƚĞŵƉĞƌĂƚƵƌĞ
ĞůůĂƌƚĞŵƉĞƌĂƚƵƌĞŚŝŐŚƚŚƌĞƐŚŽůĚ
ĞůůĂƌŚƵŵŝĚŝƚLJŚŝŐŚƚŚƌĞƐŚŽůĚ
ŽŶĚĞŶƐĞƌƚĞŵƉĞƌĂƚƵƌĞƐĞŶƐŽƌĨĂƵůƚ
ŽŶĚĞŶƐĞƌƚĞŵƉĞƌĂƚƵƌĞŚŝŐŚƚŚƌĞƐŚŽůĚ
>ŽƐƐŽĨƌĂĚŝŽĨƌĞƋƵĞŶĐLJĐŽŵŵƵŶŝĐĂƟŽŶ
ůĂƌŵƐ
Kind