Frick TDSH 163L - User Manual

TDS_
Rotary Screw Compressor
Models TDS_163 - TDS_355
This manual contains installation, operation, and maintenance
instructions. Read thoroughly before beginning installation. Failure
to follow these instructions may result in personal injury or death,
damage to the unit, or incorrect operation.
Form 070.250-IOM1 (NOV 2013)
Installation – Operation – Maintenance
File: Service Manual – Section 070
Replaces: Nothing
Distribution: 3, 3a, 3b, 3c
Revised: April 2016, p. 2, 8, 16
October 31, 2022
Check www.FrickCold.com for the latest version of this publication.

Summary

Compressor Description

TDS_ Compressor Features

Highlights the key features and design aspects of the TDS_ rotary screw compressor.

Compressor Lubrication System

Oil System Requirements

Oil Pressure

Details the critical requirements for oil pressure within the system.

Hot Alignment of Compressor;Motor

Compressor Hydraulic System

Operation

Initial Start-Up Procedure

Step-by-step instructions for the initial start-up of the compressor.

Normal Start-Up Procedure

Maintenance

Changing Oil

Procedure for changing the compressor oil and related components.

Recommended Maintenance Program

Maintenance Schedule

A schedule outlining maintenance tasks based on operating hours.

Troubleshooting Guide

Bare Compressor Replacement

Troubleshooting the Hydraulic System

Troubleshooting the Oil Pump and System

Compressor Prestart Checklist

Frick TDSH 163L Specifications

General

Brand	Frick
Model	TDSH 163L
Category	Air Compressor
Language	English