EasyManua.ls Logo

Frick TDSL 193L User Manual

Frick TDSL 193L
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TDS_
Rotary Screw Compressor
Models TDS_163 - TDS_355
This manual contains installation, operation, and maintenance
instructions. Read thoroughly before beginning installation. Failure
to follow these instructions may result in personal injury or death,
damage to the unit, or incorrect operation.
Form 070.250-IOM1 (NOV 2013)
Installation – Operation – Maintenance
File: Service Manual – Section 070
Replaces: Nothing
Distribution: 3, 3a, 3b, 3c
Revised: April 2016, p. 2, 8, 16
October 31, 2022
Check www.FrickCold.com for the latest version of this publication.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Frick TDSL 193L and is the answer not in the manual?

Frick TDSL 193L Specifications

General IconGeneral
BrandFrick
ModelTDSL 193L
CategoryAir Compressor
LanguageEnglish

Summary

Compressor Description

Compressor Details

Volume Ratio Control

Explains variable volume ratio control and stepless capacity control.

Customer Connections and Oil System Requirements

Oil System Requirements

Outlines requirements for oil selection, pressure, and cleanliness.

Oil System Details

Motor and Coupling Installation

Coupling Alignment Procedures

Emphasizes importance of coupling alignment for bearing and seal life.

Potentiometer and Hydraulic System Control

Operation and Start-Up Procedures

Initial and Normal Start-Up

Procedures for initial and normal start-up, including prestart checks.

Maintenance Practices

General Maintenance and Oil Change

Key maintenance practices, safety, and oil change procedure.

Maintenance Schedule and Analysis

Troubleshooting Guide

Abnormal Operation Analysis

Four logical steps to analyze and correct operational problems.

Troubleshooting Specific Issues

Oil Pressure and Hydraulic System Issues

Addresses problems with oil pressure and the hydraulic system.

Oil Pump and System Troubleshooting

Pre-Start Checklist

Mechanical and Electrical Checks

Lists checks required before compressor start-up.

Alignment and Operating Logs

Drive Train Alignment Procedures

Details procedures and readings for initial, hot, and final alignment.

Vibration Data Sheet

Related product manuals