Safe working ambient temperature: -15℃ to + 43℃
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear section of the
appliance, as poor air circulation can affect perfor-mance.
Built-in appliances should be positioned away from heat sources such as heaters and direct sunlight.
Leveling
The appliance should be level in order to eliminate vibration.
To make the appliance level, it should be upright and both adjusters should be in stable contact with the floor. You
can also adjust the level by unscrewing the appropriate level adjustment in the front (use your fingers or a suitable
spanner).
IN CASE THE FOLLOWING OCCURS
Warning! Before trouble-shooting, disconnect ~ the power supply. Only a qualified electrician or other
person must carry out the trouble-shooting
that is not in the manual.
Important!
Repairs to the appliance may only be performed by competent service engineers. Improper repairs can give rise to
significant hazards for the user. If your
appliance needs repairing, please contact your specialist dealer or your local Customer Service Center.
To Next Page
Loading...
