14
CHANGING THE DOOR OPENING
DIRECTION
• The side at which the door opens can be changed from the right side (as supplied)
to the left side (as supplied) to the left side, if the installation site requires.
Tools you will need:
1. 8 mm socket driver
2. cross-shaped screwdriver
3. Putty knife or thin blade screwdriver
Before you start lay the refrigerator on it`s back in order to gain access to the
base, you should rest it on soft foam packaging or similar material to avoid
damaging the cooling pipes at the rear of the refrigerator.
EN
To Next Page
Loading...
