FRIEDLAND SA5 - Part-Arm Zone Activation; Part-Arm 1 Zone Activation; Part-Arm 2 Zone Activation; Walk Through Zone Functionality

32
PART-ARM 1
This controls whether the zone is active when Part-Arm
1 is armed.
Default setting: zones 1-4: ON
Zones 5-10: OFF
Scroll through the menu until ‘3-6 Z01 Part-Arm 1’ (and
the current setting) is displayed.
To change the setting press .
Press to enable the zone in Part-Arm 1, or
Press to disable the zone in Part-Arm 1.
PART-ARM 2
This controls whether the zone is active when Part-Arm
2 is armed.
Default setting: OFF (all zones)
Scroll through the menu until ‘3-6 Z01 Part-Arm 1’ (and
the current setting) is displayed.
To change the setting press .
Press to enable the zone in Part-Arm 2, or
Press to disable the zone in Part-Arm 2.
WALK THROUGH
This controls whether the zone operates with the
systems “Walk Through” feature and determines if the
zone is the Entry-Door or is on the Entry-Route.
Default setting: OFF
Scroll through the menu until ‘3-8 Z01 Walk Through’
(and the current setting is displayed.
To change the setting press .
Scroll through the menu options until the required
setting is displayed.
Press to save and exit, or
Press to exit without saving.