9
• DFRIED V30 The Friedman 4x12 is a closed back cab with Baltic
birch, tongue and groove construction. It’s a perfect balance of
tight bottom and, big midrange, and a balanced top end.
Since its release, the Celestion
®
Vintage 30 sound has been the
ubiquitous with modern guitar sound. Set in this cab, it has
p
ower, thump, and just the right amount of cut. Captured with a
single SM57 and API preamp for a pure punchy sound.
TOP PANEL CONTROLS (SOFTWARE)
•
CONNECTED status indicates the connection status of the IR-X IR.
• PROGRAM CHANGE selector lets you navigate through all the
128 storable MIDI PROGRAM CHANGES available (0-127)
and it’s relative settings. This will actively interact with the
connected IR-X and switch presets on the device as well.
• BOOST LOCK button will let you select the BOOST behavior
when foot switching between channels: when BOOST LOCK
is not active the BOOST status will be deactivated when
switching to a different channel. When BOOST LOCK is active
the BOOST status remains unchanged. Programmed MIDI boost
will not be affected.
FIRMWARE UPDATES
IR-X Software will automatically checks for device
rmware update using internet connection.
DO NOT DISCONNECT OR POWER DOWN IR-X DURING
A FIRMWARE UPDATE TO AVOID ANY DAMAGE.
• MIDI CHANNEL selector will program the MIDI INPUT
channel the IR-X will use. Default is OMNI mode
(IR-X will listen to all channels).
• CHANNEL toggle selector toggles between CHANNEL 1
and CHANNEL 2.
• BOOST toggle selector activates or deactivates BOOST.
• FX LOOP toggle selector toggles between active and
bypass FX LOOP status.
• IR BYPASS toggle selector toggles IR Cabinet simulation
to enable using external simulations.
To Next Page
Loading...
Need help?
General
