5 PB
INTRODUCTION
Important Safety Information
Your safety and the safety of others are very
important.
We have provided many important safety messages in
this manual and on your appliance. Always read and
obey all safety messages.
This is the safety Alert symbol.
This symbol alerts you to potential
hazards that can kill or hurt you
and others.
All safety messages will follow the
safety alert symbol with the word
“WARNING” or “CAUTION”.
These words mean:
Indicates a hazard which, if not avoided, can result in
severe personal injury or death and damage to product or
other property.
Indicates a hazard which, if not avoided, can result in
personal injury and damage to product or other property. All
safety messages will tell you how to reduce the chance of
injury, and tell you what will happen if the instructions are
not followed.
Indicates property damage can occur if instructions
are not followed.
Indicates property damage can occur if instructions
are not followed.
WARNING
CAUTION
NOTICE
To ensure proper operation, Friedrich requires that all equipment is not operated during active construction phases. This includes active stages of
completing framing, dry walling, spackling, sanding, painting, ooring, and moulding in the equipment’s designated conditioning space. The use of
this equipment during construction could result in premature failure of the components and/or system and is in violation of our standard warranty
guidelines. The operation of newly installed equipment during construction will accelerate the commencement and/or termination of the warranty
period.
CAUTION
DO NOT OPERATE EQUIPMENT DURING ACTIVE
STAGES OF CONSTRUCTION
WARNING
EXPLOSION HAZARD
Please read this manual thoroughly prior to
equipment installation or operation. It is the installers
responsibility to properly apply and install the
equipment. Installation must be in conformance with
the NFPA 70-2008 National Electric Code or current
edition, International Mechanic code 2009 or current
edition and any other applicable local or national
codes.
WARNING
EXPLOSION HAZARD
Refrigeration system under high pressure. Do not
puncture, heat, expose to flame or incinerate. Only
certified refrigeration technicians should service this
equipment. Appropriate safe service and handling
practices must be used. Only use gauge sets designed
for use with R410A. Failure to do so can result in
property damage, personal injury, or death.
WARNING
ELECTRIC SHOCK HAZARD
Turn OFF electric power before service or installation.
Unit must be properly grounded.
Unit must have correct fuse or circuit breaker protection.
Unit’ s supply circuit must have the correct wire conductor
size. All electrical connections and wiring must be installed
by a qualified electrician and conform to the National
Electrical Code and all local codes which have jurisdiction.
Failure to do so can result in property damage, personal
injury and/or death.
To Next Page
Loading...
Need help?
General