CONFIGURATION
BUTTON
NOTE: You can access Thermostat Con gu-
ration settings at any time by pressing the
“Con guration” button.
11
Thermostat Con guration
Once the thermostat is powered, thermostat con guration settings will appear on
the thermostat screen.
In order to properly operate the PTAC/Vert-I-Pak unit:
➤ Set the thermostat clock;
➤ Enter the room number;
➤ Con gure the equipment settings;
➤ Select Energy Savings Preset;
The thermostat con guration screens have a 3-minute time-out. If no action is
taken within three (3) minutes, the thermostat will exit con guration settings.
NOTE: If the thermostat is connected to a network, the equipment settings
con gured on the thermostat will be ignored and the thermostat settings
con gured through the network will be applied.
To Next Page
Loading...
