34
14 – TEMPERATURE SETBACK DELAY - COOL
00-120 (20* default setting) Select the time delay (in minutes)
for which the room that is in the guest occupancy mode needs to be
unoccupied before the temperature setback is initiated.
This feature prevents initiating temperature setback prematurely while
the guest is still in the room but in an area where occupancy cannot
be detected by the occupancy sensor.
Setting the “Temperature Setback Delay - Cool” to “00”, disables the
setback in the cool mode. Set to “00” to disable EMS.
Custom Energy Savings Settings
To Next Page
Loading...
Need help?
General
