12 PB
SPECIFICATIONS
Capacities and Selection Data
Capacity characteristic charts
The following charts show the characteristics of outdoor unit capacity, which corresponds with the operating
ambient temperature of outdoor unit. This data is obtained with Free-Spin of the Condenser and not in a testing mode
Conditions:
1- Pipe length / height difference : 25 ft. (7.6m) / 0 ft. (0m)
2- Compressor at rated inverter frequenc y
3- Indoor fan speed at high fan speed
4- Capacity loss due to frost accumulation and defrost operation is not included.
To Next Page
Loading...
Need help?
General
