Friedrich SQ05 - Kühl Control Options; Wireless Programming and Control; Pre-Programmed Scheduling Options; Customizable Programming Options

9
Kühl Control Options
FRR203
Figure 7
The
Kühlgivesyouavarietyofoptionsforcontrol,programming,and
scheduling including wireless capabilities
The new FriedrichLink™ Adapter (sold seperately) allows you to conviently
control, program and monitor your air conditioning unit remotely from a
smartphone or computer.
retailers or www.friedrich.com. See FriedrichLink™ Adapter section on
www.friedrich.com for complete details.
Pre-Programmed Scheduling Options:
Your unit’s digital control comes equipped with a 24-hour timer and two pre-
programmed 7-day energy management options.
24-Hour Timer
The 24-hourtimerallowsyoutoturntheunitoffandonatpre-settimesby
settinganonandofftimeontheunitcontrolpanel. (Seepage11fordetailson
timer set-up.)
Pre-programmed Energy Management
Yourunitcomesfromthefactorywithtwo(2) Pre-programmed
Energy
Management settings are shown in Addendum 1 (Residential & Commercial
Schedule Table).
Energy Management Schedule Options are:
1. Residential Schedule – 40 Hr. Work Week
2. CommercialSchedule–5-DayBusinessWeek
The“Residential”(40Hr.WorkWeek)Schedulehasfour(4)timeperiods:06:00,
08:00, 18:00, and 22:00. This option will cause your Kühl Q unit to raise the room
temperature temporarily to 85°F during the hours wh
en most people are away
atwork,lowerthemagainto78°Fpriortothetimewhenmostpeoplewillreturn
home, and then raise slightly to 82°F to maintain a comfortable temperature
overnight.
The “Commercial” (5-Day Business Week) Schedule has two (2) time periods:
07:00 and 18:00. This option will cause your air conditioner to raise temperatures
to 84
°Faftertypicalworkinghoursandonweekendswhencommercialspaces
ar
e typically unoccupied.
(See Control Panel Operation Instructions Section)
Customizable Programming Options:
Customizable schedules, with up to four temperature adjustments per day, can
either be uploaded to the unit via the air conditioner’s built-in micro USB interface
or conveniently transmitted wirelessly using the new FriedrichLink™ Adapter
accessory, greatly simplifying the programming of one or multiple units.
See Figure 7.
See ww w.friedrich.com for c omplete Customizable
Programming instruc tions.
Wireless Programming and Control:
FriedrichLink™ Adapter accessory available through Friedrich authorized