12
ACCESSORIES
ARCHITECTURAL LOUVER
VPAL2 and VPSC2
Extruded aluminum grille that attaches to the outdoor section of the wall
plenum. Takes in fresh air and returns condensed air. VPSC2 can be ordered in
custom colors.
DIMENSIONS: 25 9/16" W x 31 1/16" H
WALL PLENUM
VPAWP1-8, VPAWP1-14
Two-part sleeve that telescopes in and out. Sits inside the exterior wall
penetration.
VPAWP1-8 telescopes from 5 1/2”–8”
VPAWP1-14 telescopes from 8”–14”
DIMENSIONS: 24 1/8” W x 30 3/8” H
CUTOUT DIMENSIONS: 24 5/8” W x 30 7/8” H
RETURN AIR GRILLE/ACCESS PANEL
VPRG4 / VPRG4R
Hinged panel allows access to unit and return air lter.
A eld-supplied lter (25” x 20”) should be mounted on the inside grille. Panel
can be mounted with return air openings high or low on the door for optimum
sound attenuation.
DIMENSIONS: 29” W x 58” H
CUTOUT DIMENSIONS: 27” W x 55 3/4” H
FIRST COMPANY SLEEVE ADAPTER
VPASA1
Single piece, welded adapter allows retrot into existing First Company SPXR-
series single package vertical unit wall sleeve and louver. Easy connection to
Friedrich small chassis VERT-I-PAK.
SINGLE STAGE THERMOSTATS
RT6P
Wired, single stage, wall-mounted programmable thermostat has two fan
speeds and backlight. Controls Friedrich VERT-I-PAK.
RT6
Wired, single stage, wall-mounted digital thermostat with two fan speeds and
backlight for control of Friedrich VERT-I-PAK.
WRT1
Wireless, single stage, wall-mounted digital thermostat with two fan speeds
and backlight for control of Friedrich VERT-I-PAK.
ENERGY MANAGEMENT THERMOSTATS
EMRT1
Wired thermostat with occupancy sensor.
EMWRT1
Wireless thermostat with occupancy sensor.
EMOCT EMRAF EMRHCF
Online connection kit. Remote access fee. Remote humidity control fee.
DRAIN PAN
VPDP1
For VHA18 and VHA24 models. May be installed prior to chassis for easy installation/
removal.
RT6, RT6P WRT1
EMRT1, EMWRT1
VPAL2
VPAWP1-8
VPRG4
VPASA1
VPDP1
To Next Page
Loading...
Need help?
General