Friedrich VERT-I-PAK VHA09K34RTQ User Manual

17 PB
SPECIFICATIONS
Closet Orientations & Dimensions
12
Closet Orientations & Dimensions

)URQW,QVWDOODWLRQ7RS9LHZ
/HIW,QVWDOODWLRQ7RS9LHZ
5LJKW,QVWDOODWLRQ7RS9LHZ


 

 
 
 








 
 

4 1/2










 

 
23 1/8"
23 1/8"
23 1/8"
23 1/8"
23 1/8"
23 1/8"
31 1/8"
31 1/8"
30 5/8"
30 5/8"
3"
26 1/8"
29 1/8"
27"
27"
27"
While all installation orientations are feasible, for the ease of installation and serviceability, Friedrich recommends Front Installation.
NOTE: It is recommended
that 6” of clearance is
provided on the side where
the primary condensate
is plumbed.
NOTE: It is recommended that
6” of clearance is provided on
the side where the primary
Condensate is plumbed.
NOTE: It is recommended
that 6” of clearance is
provided on the side
where the primary
condensate is plumbed.

Friedrich VERT-I-PAK VHA09K34RTQ Specifications

General

Brand	Friedrich
Model	VERT-I-PAK VHA09K34RTQ
Category	Heat Pump
Language	English