Friendly Robotics robomower RL350 - Page 85

3
3.2.9 Bumpers Problems (con.)
30
Is the bumper
sound heard
when pressin
g
the bumper?
Press the suspected
faulty bumper
manually
NO
Y
ES
The bumper has an activation area. If
the Robomower hits an obstacle (such
as slanted tree) and the bumper’s
active area is not pressed, the
Robomower will continue to work
a
g
ainst the obstacle for max 2 minutes
– user intervention is not needed. The
Robomower will continue in normal
operation. It is recommended to setup
Perimeter Island around slanted
obstacles, which the bumper not
always detects them.
Bumper
is OK
Take the power Pack
out of the Robomower
and re-insert
Bumper
Disc.
Refer to section
3.9.2
What messa
g
e
appears on the
LCD?
Bumper
pressed
Refer to section
3.9.1
Recommendation
Bumper is not
responding
when hitting
an obstacle
3.2.9.4
Zone A/
Dock zone
The Robomow is designed to easily work in the lawn with both types of obstacles,
however, for the most gentle and silent operation, it is preferable to demarcate all
fixed objects in and around the working area. If you are unsure about a particular
obstacle, it is best to exclude it with the perimeter wire. It will have no effect on the
efficiency of the mower and can later be removed if not needed.