12
SETTING SURFACE CONTROLS
Locations of the Gas Surface Burners
1. The SIMMER burner is best used for simmering
delicate sauces, etc.
2. The STANDARD sized burners are used for
most surface cooking needs.
3. The POWER burner is best used for bringing
large quantities of liquid rapidly up to tem-
perature or when preparing larger quantities of
food.
Figure 6: 30” Cooktop
Figure 7: 36” Cooktop
12
2
2
3
Setting a surface burner:
1. Place cooking utensil on center of surface
burner grate. Be sure the cooking utensil rests
stable on the burner grate.
2. Push the burner’s surface control knob in and
turn counterclockwise out of the OFF position
(Figure 8).
3. Release the surface control knob and rotate to
the LITE position ( ). Visually check that the
burner has a steady gas fl ame.
4. Once the surface burner has a fl ame, push the
surface control knob in and turn counterclock-
wise to the desired fl ame size setting. Adjust
the fl ame as needed using the knob markings.
Figure 8: Surface control knob
1
2
2
2
3
Figure 9: 36” Cooktop
1
2
2
2
3
To Next Page
Loading...
