Section 4 Component Teardown
4-1
Before continuing, please take note of the WARNINGS and CAUTIONS below.
IMPORTANT
- If it is necessary to remove a dishwasher unit from its installation, use proper lifting techniques as units are
heavy and could fall resulting in serious injury or death. Pulling a unit from its installation should only be
performed by a trained authorized service technician or installer.
- To avoid electric shock, power to a dishwasher unit must be disconnected whenever accessing/ removing
components powered by electricity or components near other electrical components.
- After service is completed, be sure all safety-grounding circuits are complete, all electrical connections are
secure, and all access panels are in place.
- If unit was used prior to service, the heating element will be hot. Wear protective gloves and the
appropriate safety gear when working with heating elements.
- If removing a door or drawer from a unit, remember that the doors and drawers are heavy. If they were to
fall, they could cause serious personal injury.
- All voltage checks should be made with a voltmeter having a full scale range of 130 volts or higher.
- If removing a door or drawer from a unit, remember that the doors and drawers are heavy. If they were to
fall, they could cause serious personal injury.
WARNING
- If working in the sump area, remember that tubing and heating element may be hot.
CAUTION
Component Teardown
This section explains how to access and remove components from a Frigidaire 24” Dishwasher, and has been
arranged in such a way as to simulate which components would need to be removed first in order to gain access to
other components. When following a component removal procedure, it may be necessary to reference another
component removal procedure listed earlier in this section.
To Next Page
Loading...
