To Next Page

To Previous Page

Operating Instructions

(continued)

TO OPERATE ON FAN ONLY: YOU WILL SEE:

COOL FEATURE:

YOU WILL SEE:

DO THIS:

PRESS

MODE BUTTON

CHOOSE

FAN ONLY

CHOOSE COOL

Note: In this mode the selected temperature will increase

by 2 °F 30 minutes after the mode is selected. The tempe-

rature will then increase by another 2 °F after an additional

30 minutes. This new temperature will be maintained for 7

hours before it returns to the originally selected tempera-

ture. This ends the "Sleep" mode and the unit will continue

to operate as originally programmed. The "Sleep" mode

program can be cancelled at any time during operation by

again pressing the "Sleep" button.

SLEEP FEATURE:

DO THIS:

PRESS

SLEEP BUTTON

YOU WILL SEE:

Note: Use this function only when cooling is not desired,

such as for room air circulation or to exhaust stale air on

some models. (Remember to open the vent during this

function, but keep it closed during cooling for maximum

cooling efficiency.) You can choose any fan speed you

prefer. (Except “Auto Fan”).

During this function, the display will show the actual room

temperature, not the set temperature as in the cooling

mode.

Note: In this mode, the fan remains on all the time with the

compressor cycling on and off when room temperature is

reached.

DO THIS:

PRESS

MODE BUTTON

Frigidaire FFRL0633Q1 User Manual

Questions and Answers: