To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire FFRA0522R1 and is the answer not in the manual?
Critical safety warnings to prevent severe injury or death during operation and handling of the unit.
General safety advice for using the air conditioner, including precautions against fire and electric shock.
Explanation of the power supply cord's current detection device and how to test it.
Overview of the control panel and remote functions for operating the unit.
Guide on setting delayed start or stop times for the air conditioner.
List of common issues and their corresponding troubleshooting steps.
Details on the limited warranty period, what is covered, and common exclusions.
Critical safety warnings to prevent severe injury or death during operation and handling of the unit.
General safety advice for using the air conditioner, including precautions against fire and electric shock.
Explanation of the power supply cord's current detection device and how to test it.
Overview of the control panel and remote functions for operating the unit.
Guide on setting delayed start or stop times for the air conditioner.
List of common issues and their corresponding troubleshooting steps.
Details on the limited warranty period, what is covered, and common exclusions.
This document is a Use & Care Manual for a Frigidaire Room Air Conditioner, providing comprehensive instructions for its operation, maintenance, and troubleshooting. It emphasizes safety, proper usage, and energy-saving practices to ensure efficient and long-lasting performance of the appliance.
The manual begins with important safety instructions, highlighting the need to read the manual thoroughly before operation. It warns against using extension cords or adapter plugs and stresses the importance of proper grounding to prevent electric shock and fire hazards. A specific section details the operation of the current detection device integrated into the power supply cord, instructing users on how to test and reset it. This device is designed to reduce the risk of fire by sensing damage to the cord. Users are cautioned not to bypass or modify the grounding prong and to ensure the unit is installed in a properly grounded wall receptacle. The manual also advises against inserting fingers or objects into the air discharge area, operating the unit with wet hands, or pulling on the power cord. In case of malfunction, users are instructed to immediately stop operation, disconnect the power cord, and call an authorized servicer.
Before operating the air conditioner, the manual advises allowing the unit to remain upright for one hour. It then guides users through the product registration process and explains how to remove packaging inserts. A section on "Normal Sounds" helps users identify typical operational noises like rushing air, high-pitched chatter from the compressor, vibrations due to installation, gurgling/hissing from refrigerant, and pinging/swishing from water hitting the condenser. This helps differentiate normal sounds from potential issues, preventing unnecessary service calls. A crucial note warns against drilling holes in the base pan to eliminate normal sounds, as this would void the warranty.
The core of the manual focuses on the air conditioner's features and operating instructions, covering both the touch pad and remote control functionalities. The electronic control panel allows users to adjust temperature, fan speed, and mode settings. The remote control, while universal for many models, may have features not applicable to a specific unit. Instructions are provided for turning the unit on and off, changing temperature settings (between 60°F/16°C and 90°F/32°C), and adjusting fan speeds (High, Low, or Auto). The "Auto Fan" feature automatically adjusts fan speed based on room temperature, increasing speed when the room warms up and decreasing it as it cools.
The manual also explains how to operate the unit in "Fan Only" mode for air circulation or exhausting stale air, noting that in this mode, the display shows the actual room temperature rather than a set temperature. For cooling, the "Cool" feature is described, where the fan remains on continuously while the compressor cycles on and off to maintain the set temperature. A "Delay Stop / Start" timer feature allows users to program the unit to turn on or off after a set period, adjustable in 0.5-hour increments up to 10 hours, then 1-hour increments up to 24 hours. This feature automatically selects cooling with maximum fan speed, but the set temperature can be adjusted.
Maintenance features are detailed under "Care and Cleaning." Users are instructed to clean the air conditioner occasionally to maintain its appearance and efficiency. The air filter should be checked at least once a month and cleaned by washing with liquid dishwashing detergent and warm water, or by vacuuming. The "Check Filter" feature illuminates an LED after 250 hours of operation as a reminder to clean the filter, which can then be reset by pressing the "Filter Reset" button. Cabinet cleaning involves dusting with an oil-free cloth or washing with a damp cloth and mild detergent, avoiding harsh cleaners or excessive water around controls. For winter storage, users are advised to remove the unit according to installation instructions and cover it.
The manual also includes "Additional Things You Should Know," such as the automatic 3-minute time-delayed start for the "Cool" circuit to prevent compressor overheating and circuit breaker tripping, and a 2-second delay for compressor shutdown when selecting "Fan Only" mode. The unit memorizes the last setting after a power outage. Air directional louvers, specifically "Auger Wheels," allow users to adjust airflow up, down, left, or right.
"Energy Saving Ideas" provide practical tips for maximizing efficiency. These include avoiding blocking airflow, ensuring the unit's capacity matches room size, installing the unit on the shady side of the home, closing fireplace dampers and registers, keeping blinds and drapes closed during sunny hours, cleaning the air filter regularly, ensuring proper home insulation and weather stripping, using external house shading, and operating heat-producing appliances during cooler parts of the day.
Finally, a "Before You Call" section offers a troubleshooting guide for common occurrences like the unit not operating, air not feeling cold enough, ice forming on cooling coils, or abnormal noises. It provides solutions such as checking power connections, cleaning the air filter, or adjusting temperature settings. If these solutions fail, users are directed to call Frigidaire Service. The manual concludes with a "Major Appliance Limited Warranty" outlining coverage details, exclusions, and service contact information for both USA and Canada.
General| Type | Window Air Conditioner |
|---|---|
| Cooling Capacity | 5, 000 BTU |
| Cooling Area | 150 sq. ft. |
| Voltage | 115V |
| Noise Level | 52 dB |
| Fan Speeds | 2 |
| Refrigerant | R-410A |
