Frigidaire FFRA0811R1

Need help?

Do you have a question about the Frigidaire FFRA0811R1 and is the answer not in the manual?

Summary

Important Safety Instructions

For Your Safety

Advises against storing flammable materials near the unit to prevent fire hazards.

Prevent Accidents

Outlines basic precautions for installation and handling to reduce risk of injury.

Electrical Information

Details grounding requirements and the importance of proper electrical connections.

Safety Precautions

Warns against inserting objects, improper operation, and handling with wet hands.

Before You Call

Troubleshooting Occurrences

Common issues and their solutions before contacting service.

Major Appliance Limited Warranty

Warranty Coverage

Details the terms and duration of the limited warranty.

Summary

Important Safety Instructions

For Your Safety

Advises against storing flammable materials near the unit to prevent fire hazards.

Prevent Accidents

Outlines basic precautions for installation and handling to reduce risk of injury.

Electrical Information

Details grounding requirements and the importance of proper electrical connections.

Safety Precautions

Warns against inserting objects, improper operation, and handling with wet hands.

Before You Call

Troubleshooting Occurrences

Common issues and their solutions before contacting service.

Major Appliance Limited Warranty

Warranty Coverage

Details the terms and duration of the limited warranty.

This document serves as a comprehensive Use & Care Manual for a Frigidaire Room Air Conditioner, providing detailed instructions for its operation, maintenance, and troubleshooting. It emphasizes safety precautions, proper installation, and energy-saving tips to ensure efficient and long-lasting performance of the unit.

Function Description

The Frigidaire Room Air Conditioner is designed to cool and circulate air within a room, providing comfort during warm weather. It operates by drawing in warm room air, passing it over cooling coils, and then expelling cooler air back into the room. The unit features various modes and settings to allow users to customize their cooling experience based on their preferences and room conditions.

The core function of the air conditioner is to maintain a desired room temperature. This is achieved through a compressor-based cooling system that removes heat and humidity from the air. The unit also includes a fan-only mode for air circulation without cooling, which can be useful for ventilating a room or simply moving air around.

Usage Features

The air conditioner offers several user-friendly features to enhance its operation:

Temperature Selector: This control allows the user to set the desired room temperature when the unit is in "COOL MODE." The selector typically ranges from lower numbers (warmer settings) to higher numbers (colder settings). Rotating the selector clockwise increases the cooling effect, resulting in a lower room temperature, while rotating it counter-clockwise decreases the cooling effect, leading to a higher room temperature. The thermostat automatically manages the compressor's operation to maintain the chosen temperature, turning it on and off as needed.

Mode Control: The MODE knob enables selection between different operational settings:

High Cool: Provides maximum cooling effect and airflow, ideal for quickly cooling a warm room.
Intermediate Cooling: A setting between "High Cool" and "Low Cool," offering a moderate cooling effect and airflow.
Low Cool: Delivers minimum cooling effect and airflow, suitable for maintaining a comfortable temperature without excessive cooling.
Fan Mode: In this mode, the compressor does not run, and the unit only circulates air using its fan. This is useful for ventilation or simply moving air without cooling. Different fan speeds may be available within this mode.

Air Directional Louvers (Auger Type): These louvers allow users to direct the airflow both horizontally (Left/Right) and vertically (Up/Down) throughout the room. By rotating the Auger Wheels, the Left/Right direction can be adjusted, and by pivoting the horizontal louvers, the Up/Down direction can be controlled. This feature ensures that cool air is distributed effectively and comfortably across the room.

Fresh Air Vent Control (on some models): This feature provides options for air exchange:

Vent Closed (Recirculate inside air): In this position, the unit recirculates only the air within the room, maximizing cooling efficiency.
Fresh Air (Draw fresh air into the room): This setting allows the unit to draw in fresh air from outside, which can be beneficial for improving indoor air quality.
Vent Open (Exchange air from the room): This option facilitates the exchange of air from the room with outside air, helping to remove stale air.

Power Supply Cord with Current Detection Device: The power cord is equipped with a safety device that senses damage to the cord. It includes "TEST" and "RESET" buttons. Users are instructed to test this device by plugging in the unit, pressing "TEST" (which should cause the "RESET" button to pop out), and then pressing "RESET" (which should engage the button and indicate power supply to the unit). This ensures the cord is functioning safely. It is crucial not to use this device to turn the unit on or off, and to replace the cord if it fails to reset.

Important Operational Notes:

Always wait at least 3 minutes when turning the unit off then on again, or when switching between cool and fan modes. This prevents compressor overheating and potential circuit breaker trips.
The unit should be kept upright for at least one hour prior to operation, especially after transport, to allow refrigerants to settle.
The manual also addresses normal sounds the unit may make during operation, such as "High pitched Chatter" from high-efficiency compressors, "Vibration" due to installation, "Sound of Rushing Air" from the fan, "Gurgle/Hiss" from refrigerant, and "Pinging or Swishing" from water hitting the condenser. These are generally considered normal and not indicative of a malfunction.

Maintenance Features

Regular maintenance is essential for the air conditioner's efficiency and longevity. The manual outlines simple steps for cleaning and storage:

Air Filter Cleaning: The air filter should be checked and cleaned at least once a month. A dirty filter can lead to reduced efficiency and frost accumulation on the cooling coils.

To clean, the vent handle should be pushed to the "Vent Closed" position (if applicable), and the front panel opened.
The filter is then grasped by the center and pulled out.
It can be washed with liquid dishwashing detergent and warm water, rinsed thoroughly, gently shaken to remove excess water, and allowed to dry completely before reinstallation.
Alternatively, the filter can be vacuumed clean.

Cabinet Cleaning: The exterior cabinet and front panel can be dusted with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent.

It is important to unplug the unit before cleaning to prevent electric shock.
After washing, the surfaces should be rinsed thoroughly and wiped dry.
Harsh cleaners, wax, or polish should not be used on the cabinet front.
Care should be taken to wring excess water from the cloth before wiping around the controls to prevent damage to the air conditioner.

Winter Storage: If the air conditioner will not be used during winter, it should be carefully removed from the window according to the installation instructions. To protect it, the unit should be covered with plastic or returned to its original carton.

Energy Saving Ideas: The manual provides tips to maximize energy efficiency:

Avoid blocking airflow with blinds, curtains, furniture, or outdoor obstructions.
Ensure the unit's capacity matches the room size.
Install the unit on the shady side of the home, ideally a north-facing window.
Close fireplace dampers, floor, and wall registers to prevent cool air escape.
Keep blinds and drapes closed during the sunniest parts of the day.
Maintain a clean air filter.
Ensure proper insulation and weather stripping in the home.
Use external house shading (trees, plants, awnings) to reduce the air conditioner's workload.
Operate heat-producing appliances during the coolest part of the day.

Troubleshooting Guide: A "Before You Call" section lists common occurrences and their solutions, helping users diagnose and resolve minor issues without needing professional service. This includes problems like the unit not operating, insufficient cooling, ice formation on coils, rapid cycling, unusual noises, and water dripping. For persistent issues, users are directed to contact customer service.

Frigidaire FFRA0811R1 Specifications

General

Type	window
Color	white
Operating Area Size	350 square feet
Cooling Capacity	8000 british thermal units
Cooling Settings	3
Heater	no
Fan Airflow Rate	206 cubic feet per minute
Filter	antibacterial
Remote Control	yes
Timer	yes
Sleeping Mode	yes
Current	6.5 amperes
Height	13.4375 inches
Width	18.5 inches
Net Weight	56 pounds