Frigidaire FFRE0833S1 User Manual

READ BEFORE INSTALLING UNIT
MSII MSIII Window Mounting (5,000~8,000 BTU)
1
Installation Instructions
Before installing, the top rail must be assembled on the unit.
DO NOT USE ANY SCREWS OTHER THAN
THOSE SPECIFIED HERE.
NOTE:
SAVE CARTON and these INSTALLATION
INSTRUCTIONS for future reference. The carton is
the best way to store unit during winter, or when not
in use.
FOR SAFETY REASONS, THE TOP RAIL MUST BE
SECURELY FASTENED WITH ALL FOUR (4)
SCREWS.
A. Remove the air conditioner from the carton and place on a flat surface.
B. Remove top rail from the rear of the packaging material as shown in Fig. A
C. Align the hole in the top rail with those on the top of the unit as shown in Fig. B
D. Secure the top rail to the unit with the 3/8Ǝ Screws as shown in Fig. C
Top Rail Hardware
Qty.
4
1
3/8Ǝ Screw
Top Rail
Some assembly is required. Please read these instructions
carefully.
Packaging
Fig. A
The unit is for window mounting only.
INSTALLATION WARNINGS AND CAUTION
Pay attention to danger and safety notices.
To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may
be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install
the unit. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils. To
prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit overan extended
period of time.
Handle air conditioner with care.
Make sure air conditioner does not fall during installation.
Carefully read the installation manual before beginning.
Follow each step as shown.
Observe all local, state, and national electrical codes and by qualified, licensed, authorized personnel only.
Drill (If pilot holes are needed)
7
1
Mounting Hardware
Qty.
2
s)
2
( or Wooden windows)
weather stripping
insulation panel
ruler
(10”X3/4”X1/12”)
5
window sash seal foam 1
2
1
1
2
3
45
678
9
10 11
12
1
2
3
4
5
16120300A04442
Top Rail

Frigidaire FFRE0833S1 Specifications

General

Type	Window air conditioner
Timer type	Digital
Certification	UL/CUL
Number of speeds	3
Remotely operated	Yes
Refrigerating medium	R410A
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Dehumidifying
Cooling capacity in watts	- W
Sustainability certificates	ENERGY STAR
Suitable for room area up to	32.5 m²
Cooling energy efficiency (EER, W/W)	-
Product color	White
AC input voltage	115 V
AC input frequency	60 Hz
Power consumption (cooling)	665 W

Weight and Dimensions

Depth	444.5 mm
Width	470 mm
Height	341.3 mm
Weight	23586 g
Package depth	495.3 mm
Package width	562 mm
Package height	374.65 mm
Package weight	27215 g
Window opening width (max)	914.4 mm
Window opening width (min)	584.2 mm
Window opening height (min)	355.6 mm

Summary

Installation Warnings and Caution

Installation

Left and Right Filler Panel Assembly

Instructions for assembling and installing the left and right filler panels into the air conditioner unit.

Storm Window Installation

Guidance on installing the air conditioner when a storm window is present or needs modification.

Window Mounting Steps

Placing Unit in Window Opening

Step-by-step guide to carefully placing the air conditioner into the window opening.

Extending and Securing Side Panels

Instructions for extending side panels and securing the frame lock to the window sill.

Driving Locking Screws

Details on driving locking screws for securing the unit, including pilot hole recommendations.

Sealing and Securing the Installation

Installing Insulation Panel

Measuring, cutting, and sliding insulation panels into the side curtain frames.

Securing Lower Sash and Foam Seal

Attaching the sash lock and inserting foam window seal for better insulation.

Final Checks and Removal

Checking Unit Tilt and Airflow

Verifying the unit's tilt for proper condensate drainage and airflow.

Minimizing Air Leaks with Weather Stripping

Applying weather stripping to seal any gaps around the air conditioner.

Removing the Air Conditioner

Procedure for safely turning off, disconnecting, and removing the unit from the window.