Fritz! 7330 - Page 98

FRITZ!Box 7330 98
Making Telephone Calls with Convenience Functions
Alternating Between Calls
Call 1
P
You are talking with party 1.
R Press the Hold (“R”) button.
M Call party 2.
• Dial an external telephone number,
• or dial ss and an internal telephone number.
Internal telephone numbers:
Socket “FON 1” of the FRITZ!Box: 1
Cordless DECT telephones: 610 – 615
IP telephones: 620 – 629
Call 2
P
When party 2 picks up the receiver the call has been
established.
The connection with party 1 is on hold.
R2 If you would like to return to the waiting party 1, dial
the keypad sequence at left.
With this keypad sequence you can alternate be-
tween the two parties as often as you like.
Ending Hold
O The waiting party hangs up and you continue the
call with the other party.
R1
or
You end the call with party 2 by dialing the keypad
sequence at left. The conversation with party 1 is
resumed.
O
K
P
or
You can end the active call by hanging up the hand-
set. Your phone rings. As soon as you pick up the re-
ceiver you are connected with the waiting party.