Fritz! 7330 - Page 99

Making Telephone Calls with Convenience Functions
FRITZ!Box 7330 99
Consultation / Hold
You can put a telephone call on hold in order to consult with
another party. You call the second party. The party to the oth-
er call does not hear the consultation; after you are finished
you can resume the call that was on hold.
Consultation / Hold
Call 1
P
You are talking to caller 1.
R Press the Hold button. Call 1 is on hold. Party 1
can no longer hear you.
M Establish the connection to party 2: Dial an in-
ternal telephone number (see page 93) or an
external telephone number.
Call 2
P
If party 2 accepts the call, you can conduct the
conversation.
R If party 2’s line is busy or the call is not an-
swered, press the Hold button again to return
to call 1.
R1 Use this keypad sequence to return from call 2
back to call 1. Call 1 is now active again.
If you only press the Hold button, the connec-
tion to caller 2 remains on hold until caller 2
hangs up.
You can also end call 2 by hanging up the recei-
ver. Your telephone rings and after you pick up
the receiver again you will be connected with
party 1.