FRITZ!WLAN Repeater DVB-C 16
Establishing a Wireless LAN Connection Using WPS
2. Press the “WPS” button on the FRITZ!WLAN Repeater.
Hold the button down until the “WLAN” LED flashes.
3. You have two minutes for the next step: Start WPS on the
wireless access point.
On a FRITZ!Box, press the button labeled “WLAN/WPS”,
“WPS” or “WLAN” until the “WLAN” LED on the FRITZ!Box
flashes.
4. Wait until the LEDs displaying signal strength light up on
the FRITZ!WLAN Repeater.
The connection is established.
5. Select the best location for expanding the wireless radio
network; for more information, see page 18.
Insert the FRITZ!WLAN Repeater into an electrical outlet
at that location.
The connection with the wireless access point is re-estab-
lished automatically.
LAN
WLAN
Power
FestnetzFestnetz
InternetInternet
WLANWLAN
INFOINFO
Power/DSLPower/DSL
6 seconds
To Next Page
Loading...
