Fritz! DVB-C - Wireless Network Schedule

FRITZ!WLAN Repeater DVB-C 32
Configuring a Switching Schedule for the Wireless Radio Network
13 Configuring a Switching Schedule for the Wireless
Radio Network
You can configure a schedule for times at which the wireless network
of the FRITZ!WLAN Repeater is to be turned on and off automatically.
Switching off the wireless network reduces power consumption.
1. Open the FRITZ!WLAN Repeater user interface (see
page 22).
2. Select “WLAN / Schedule”.
3. Enable the “Use schedule for wireless network” check-
box.
4. To set up a switching schedule only for the FRITZ!WLAN
Repeater, disable the “Adopt schedule settings from the
FRITZ!Box” checkbox.
5. Set up the switching schedule.
6. Click “Apply”.