Help in Case of Errors
FRITZ!WLAN Repeater DVB-C 33
14 Help in Case of Errors
14.1 LEDs Not On
The LEDs on the FRITZ!WLAN Repeater do not light up.
The FRITZ!WLAN Repeater has no electricity.
• Make sure that the FRITZ!WLAN Repeater is connected to
electrical power.
• Make sure that the electrical outlet is active.
The LEDs have been disabled.
Open the user interface (see page 22). In the “System / LEDs”
menu, enable the “LED display on” option and click “Apply”.
14.2 The User Interface Is Not Displayed
The user interface of the FRITZ!WLAN Repeater is not
displayed in the web browser.
The address “fritz.repeater” cannot be reached.
Open the network overview of your wireless access point.
Make note of the IP address of your FRITZ!WLAN Repeater. En-
ter this address in the address field of your browser.
If the connection to the wireless access point is interrupted,
connect your computer to the FRITZ!WLAN Repeater using the
LAN cable included with delivery. Then enter the IP address
http://192.168.178.2
in the address line of your browser.
Cause
Help
Cause
Help
Cause
Help
To Next Page
Loading...
