FRITZ!WLAN Repeater DVB-C 40
Cannot Access Devices in the Network
14.8 Cannot Access Devices in the Network
No other devices in the network can be accessed.
A firewall is running on the devices.
Configure the firewall to allow access to the network.
The devices are not configured to receive their IP addresses
automatically.
Set up the devices as directed in the section Obtaining an IP
Address Automatically from page 41.
The devices are not bound to TCP/IP.
Check the network connection of the network adapter in the
device in question. See the documentation of your operating
system for more information.
Cause
Help
Cause
Help
Cause
Help
To Next Page
Loading...
