Establishing a Connection Manually
FRITZ!WLAN Repeater 310 15
3.3 Establishing a Connection Manually
Using this method, you can connect the FRITZ!WLAN Repeater
with your WLAN base station even if the WLAN base station
doesn’t support WPS and you cannot use the online wizard.
Connecting FRITZ!WLAN Repeater with a Computer
1. Connect the FRITZ!WLAN Repeater to an electrical outlet
in the vicinity of the FRITZ!Box.
2. Use the computer’s WLAN software to establish a wire-
less connection between the computer and
FRITZ!WLAN Repeater. Select WPA or WPA2 as encryption
method and enter the key 00000000 (8 zeros, the value
preset in the FRITZ!WLAN Repeater).
Starting the Configuration Wizard
1. Start a web browser on the computer that is connected
with your FRITZ!WLAN Repeater.
2. Enter fritz.repeater
in the address line of the browser.
3. The FRITZ!WLAN Repeater Configuration Wizard is start-
ed. Click “Next” and follow the instructions.
A secure WLAN connection is being established between the
FRITZ!WLAN Repeater and the FRITZ!Box.
To Next Page
Loading...
