Fritz! WLAN Repeater - Troubleshooting Common Issues; No LED Illumination; User Interface Not Loading

FRITZ!WLAN Repeater 310 22
Help in Case of Errors
6 Help in Case of Errors
6.1 LEDs Not On
The LEDs on the FRITZ!WLAN Repeater do not light up.
The FRITZ!WLAN Repeater has no electricity.
• Make sure that the FRITZ!WLAN Repeater is connected to
electrical power.
• Make sure that the electrical outlet is active. Test this by
plugging another functioning electrical device into this
outlet.
The display on the FRITZ!WLAN Repeater was switched off
completely.
Open the user interface of the FRITZ!WLAN Repeater in the
web browser (see page 19). In the “System / Display” menu,
enable the “Always show status information” option and click
“Apply” to save the setting.
6.2 The User Interface Is Not Displayed
The user interface of the FRITZ!WLAN Repeater is not
displayed in the web browser.
The user interface of the FRITZ!WLAN Repeater cannot be
reached under the address “fritz.repeater”.
Open the network overview of your WLAN base station. Note
the IP address listed there for your FRITZ!WLAN Repeater. En-
ter this IP address in the address line of your browser.
Cause
Help
Cause
Help
Cause
Help