Fritz! WLAN Repeater - Accessing the Repeater User Interface; Opening the Web Interface; Securing the User Interface

The User Interface of the FRITZ!WLAN Repeater
FRITZ!WLAN Repeater 310 19
5 The User Interface of the FRITZ!WLAN Repeater
The FRITZ!WLAN Repeater has a user interface you can open in a web
browser on your computer.
In the user interface, you can edit the FRITZ!WLAN Repeater’s settings,
enable or disable features and perform firmware updates.
Detailed descriptions of and instructions for settings and features of
the FRITZ!WLAN Repeater are presented in the user interface’s Online
Help.
5.1 Opening the User Interface
The user interface can be opened on every computer connect-
ed with the FRITZ!WLAN Repeater or the WLAN base station.
1. Start a web browser on your computer.
2. Enter fritz.repeater
in the address field of the browser.
The user interface is displayed.
If the user interface is not displayed, please see the instruc-
tions in the section The User Interface Is Not Displayed on
page 22.
5.2 Protecting the User Interface with a Password
You can protect the user interface with a password. The pass-
word will be requested every time the user interface is
opened. This protects the settings of your
FRITZ!WLAN Repeater from unauthorized access.
We strongly recommend setting up and using password pro-
tection for the user interface.