Froling RBG 3200 - Circulation Pump - Temperature Settings; System Settings; System - Error Display

Parameters overview | 5
B0640421_en | Operating instructions Control Panel RBG 3200 25
5.7.2 Circulation pump - Temperatures
Basic display
Circ.
pump
Temperatures
Switch off the pump at what return temperature in the circulation line
If the set temperature at the return circulation line is reached, the circulation pump will be
deactivated.
NOTICE!Parameter only relevant when using a return feed sensor in the circulation
line!
5.7.3 Circulation pump - Times
Basic display
Circ.
pump
Times
Ü "Setting times" [}14]
5.8 System
5.8.1 System - Current values
Basic display System Current values
Display of the current value for the relevant parameter. The parameters displayed
depend on the boiler configuration!
5.8.2 System - Error
Error - Error display
Basic display System Error Error display
Display of the current fault messages. In addition, you can also invoke time
information here, such as when the fault occurred, when the fault was acknowledged
and when the fault was cleared.