Installing the RBG 3200 | 2
B0640421_en | Operating instructions Control Panel RBG 3200 7
2.4 Initial startup
NOTICE
You should have the initial startup carried out by the authorised heating engineer from
Froling customer services.
Once you have connected the device to the power supply and switched on the main
switch, the start logo will appear and the control will perform a system check.
After the system check the basic display will appear.
The default basic display provides information about the two main parameters,
however it can be customised to the user's individual requirements.
Ü "System - Basic display parameters" [}26]
To Next Page
Loading...