Fromm A335 - Chart of Types A335; Operation; Safety Precautions During Operation

4
A335T1.en.fm
5 CHART OF TYPES A335
6 OPERATION
Feeding the strapping around the pack-
age
The strapping is fed around the package in the direc-
tion as shown in the illustration. The strapping end is
held tightly with the left hand and pulled firmly
towards the operator with the right hand.
Loading the strapping
The rocker is raised with the right hand. The left hand
inserts the two straps lying precisely upon another
into the tool until they hit the strap stops.
The lower strap end must slightly protrude the end of
the base plate.
Be certain that the strapping is held by the strap guide.
Item No. Model Strap width Strap thickness
13.2770 A335/12.7/0.50 - 0.58 12.7 mm / 1/2" 0.50 - 0.58 mm / 0.020 - 0.023"
13.2780 A335/13/0.50 - 0.58 13.0 mm 0.50 - 0.58 mm / 0.020 - 0.023"
13.2790 A335/16/0.50 - 0.58 16.0 mm / 5/8" 0.50 - 0.58 mm / 0.020 - 0.023"
13.2810 A335/19/0.50 - 0.58 19.0 mm/ 3/4" 0.50 - 0.58 mm / 0.020 - 0.023"
When handling strap, always wear protective
gloves and safety glasses with side shields
which conform to ANSI Standard Z87.1.