10
P324mane.fm
5 OPERATING ELEMENTS
6OPERATION
6.1 Installation
Do not expose power tools to rain or wet conditions!
For safety reasons the battery is delivered uncharged.
Charge the battery before working. See separate operating instruction of the battery charger.
Never charge a damaged battery. Replace by a new one immediately.
Do not open batteries and store them only in dry and frost-proof rooms.
The maximum ambient temperature is 50°C.
Keep dry at all times.
Inserting the battery
Insert the battery from bottom to top into the tool
both unlatching push buttons latch.
When inserting the battery the status of the charge
is displayed shortly.
Displaying of the status of the battery
charge by LED
Green blinking full
Green yellow
blinking
3/4 full
Yellow blinking 1/2 full
Yellow - red blinking 1/4 full
Red blinking empty
Tension button
Sealing lever
Unlatching push button
LED
Handle lever
LED - Indication
Green During tensioning the LED
lights green.
Green During welding the LED lights
green.
Yellow Cooling time is running, the
tool must not be removed from
the strap.
Green Cooling time is finished, the
tool can be removed from the
strap.
Red Charge the battery.
Red blinking The control board is
overheated,
the tool has to cool down,
the switches are locked.
To Next Page
Loading...
