Fronius CU 1100i - General; Device Concept; Device Versions

General
Device concept The cooling unit and the power source
form a unit. As with the standalone power
source, the power source/cooling unit
combination can be mounted on the trol-
ley.
Device versions
Cooling unit description Cooling unit compatible with
CU 800i (standard version)
- For single-shift operation
- The coolant pump and fan are switched on
and off automatically as standard. The op-
erating status of the cooling unit can be
manually changed by selecting different op-
erating modes
- TPS 270i C power sources
CU 800i /460 V (standard version for 460 V
operation)
- For single-shift operation
- The coolant pump and fan are switched on
and off automatically as standard. The op-
erating status of the cooling unit can be
manually changed by selecting different op-
erating modes
- TPS 270i C power sources
CU 800i Pro (professional version)
- For multi-shift operation, multivoltage op-
eration, 600 V operation
- The coolant pump and fan are switched
on and off automatically as standard (if the
OPT/i CU flow temperature sensor option
has been selected, the coolant pump and
fan are controlled electronically). The op-
erating status of the cooling unit can be
manually changed by selecting different
operating modes
- TPS 270i C power sources
CU 1100i (standard version)
- For single-shift operation
- The coolant pump and fan are switched on
and off automatically as standard. The op-
erating status of the cooling unit can be
manually changed by selecting different op-
erating modes
- TPS 320i - 600i power sources
- iWave 300i - 500i power
sources (not compatible with
Mulitvoltage power sources of
the iWave series)
19
EN