Warning notices on the device
Overview The cooling unit displays safety symbols and has a rating plate. The rating plate and
safety symbols must not be removed or painted over. The symbols warn against operat-
ing the equipment incorrectly, as this could result in serious injury or damage to property.
5 bar (0.5 MPa) 1.1 kW
P1l/min
1~
50 Hz
IEC 60 974-2/-10 Cl.A IP 23
0.35 A
U1
460 V
pmax
I1
www.fronius.com
Ser.No.:
Part No.:
pmax
I1
Welding is dangerous. The following basic requirements must be met
to ensure the equipment is used properly:
- Welders must be sufficiently qualified
- Suitable protective equipment must be used
- All persons not involved must be kept at a safe distance from the
cooling unit and the welding process
Do not use the functions described here until you have fully read and
understood the following documents:
- This document
- All safety rules and user documentation for this device and all
system components
Do not dispose of used devices with domestic waste. Dispose of them
according to the safety rules.
25
EN
To Next Page
Loading...
