17
ENEN
(4) LED flashes orange:
- when a warning is being displayed on the screen
- or the FRONIUS IG unit has been set to standby operation in the
setup menu = manual shutoff of power supply operation
- after the next day sunrise, power supply operation will be resu-
med automatically
- during the time while the orange LED keeps flashing, the power
supply operation can be resumed manually at any time (see
chapter „Setup Menu“)
(5) LED lights up red:
- general status: the respective service code is displayed on the
screen
Inverter does not feed energy into the public grid.
A list of all service codes, the corresponding status informations, their
status causes and repair measures can be found in the chapter „Sta-
tus Diagnosis and Repair“ of the installation and service manual.
(6) LED remains dark:
- there is no connection to the solar modules
- no power output from module due to darkness
LED for opera-
ting status
(continued)
To Next Page
Loading...
