Need help?Do you have a question about the Fronius IG Plus A 3.0-1 UNI and is the answer not in the manual?
General| AC nominal output | 3000 W |
|---|---|
| Max. apparent AC power | 3000 VA |
| Max. output current | 13 A |
| AC grid frequency | 50 / 60 Hz |
| THD | <3% |
| Max. DC voltage | 500 V |
| Number of MPP trackers | 1 |
| AC voltage range | 183 V - 264 V |
| DC input voltage range | 150 - 450 V |
| Cooling | Convection |
Guidelines for installation and maintenance of the inverter.
Explanation of warning symbols and hazard descriptions.
Instructions for qualified personnel performing servicing and repairs.
Warnings regarding electric shock and handling.
Inverter's protection against ground faults and arcs.
Safety precautions during installation.
General criteria for inverter placement.
Steps for assembling and mounting the wall bracket.
Procedures for mounting on different wall types.
Mounting the bracket on outdoor columns or metal carriers.
Recommendations for safely lifting and physically installing the inverter.
Electric shock warnings for grid connection.
Electric shock warnings for DC connections.
Guidelines and recommendations for selecting appropriate string fuses.
Steps to power on and initialize the inverter.
Procedure for selecting the correct grid type.
Inverter's startup sequence, self-tests, and grid synchronization.
Safety precautions and steps for opening and installing cards.
Inverter self-test, grid check, and startup sequence.
Inverter's operation after successful startup.
Steps to enter the setup menu.
Procedure to set the inverter's date and time.
Procedure to enable/disable setup lock using an access code.
Categorization of error codes (Class 1 to Class 5).
Safety warnings for servicing and maintenance.
Procedure for safely opening the inverter for service.
Safety precautions and steps before replacing fuses.
Procedure for replacing fuses and reassembling the inverter.
Safety warnings and steps before replacing GFDI fuse.
Procedure for replacing the GFDI fuse and reassembling.
Procedure for resetting via the display after arc detection.
Procedure for resetting via the Arc Blocker switch.
To Next Page